Alinco DJ-NX40T

General NXDN/iDAS Discussion
User avatar
Posts: 14
Joined: Mon Jul 24, 2017 11:13 am
Location: Rehoboth,Mass

Re: Alinco DJ-NX40T

Post by kb1kvd » Mon Aug 21, 2017 10:43 am

I would check to make sure that both different systems are set to either very narrow (6.25Kc) or narrow (12.5Kc). One of the big issues with NXDN is the bandwidth setting, in order for the radios to talk they have to be all set to the same bandwidth. The screenshot of the Kenwood software shows that the radio is programmed to narrow (12.5Kc) digital and the Alinco is more than likely set to very narrow (6.25Kc).
10% of the people cause 90% of the problem and 90% of them are within a mile of your location.

If it wasn't for jerks and idiots life would be pretty dull.
Post Reply